The submerged deck for automatic covers

BWT Pool Products offers a new product called BWT Subéo AX-IN, designed to meet the challenges of today's swimming pools. BWT Subéo AX-IN is an automatic underwater casing that combines a mechanical structure and a deck to form a complete cover. The word that sums up the product is adaptability, because it offers a multitude of choices of finishes and assemblies to satisfy a maximum number of uses, for both professionals and private individuals.

A simple, well-designed system

BWT Subeo, like all covers in the BWT range, provides optimal protection against accidental falls into the water. BWT Subéo complies with standard NF P90-308, allowing you to enjoy your pool with complete peace of mind.

Aesthetics

• New duckboards for a perfect finish

• Adjust the gap between 2 duckboard slats to fit the width of the pool perfectly.

Easy to install and use

• Several installation solutions and 2 fixing systems

• A new design for a light, strong beam without a deflector

• The duckboards are fixed to the beam using a quick, easy and safe clip-on system, providing quick access for cleaning the pit

• An installation tool that makes installation much easier, designed for all versions of BWT Subéo AX-IN covers

BWT Subéo AX-IN has been designed to adapt to a maximum number of installations

1 - Two beams with masonry partition wall

This is the main version of BWT Subéo AX-IN. The duckboards are clipped onto two beams and placed against the dividing wall. This aligns the top of the duckboards with the top of the wall.

2 - Two beams with industrialised partition wall

Particularly well-suited to renovation projects, industrialised partition walls avoid the need to build a masonry wall over an existing pool. In this case, the duckboards also clip onto two beams, but pass over the wall. Adjustable cradles are supplied to hold the partition wall in place at the bottom of the pool. These cradles adapt to the width of the pit, between 650 mm and 800 mm, and ensure the integrity of the wall when used as a swimming surface.

3 - A beam with a masonry partition wall

This version is used when the installer wishes to use the partition wall as a support for the duckboards. To hold them to the wall, a locking bar is supplied which is fixed to the top of the partition wall. This bar can be installed with anchors or be wall-mounted. In this version, the duckboards are not standard, as the thickness of the partition wall varies depending on the installer. The anchors must be installed in a specific position. It is essential to carefully follow the installation drawings supplied by BWT Pool Products.

Combine aesthetics and functionality

Duckboards

The standard duckboards consist of two clip-on sections. The first is made of recycled PVC, while the second may be made of coloured PVC or aluminium. The sections are closed by two plugs that are clipped onto their support, eliminating the need for glue. This design limits the use of raw materials (mass-dyed PVC and aluminium) and means that the finish can be changed without altering the main structure of the duckboards. Only the plugs and casing sections need to be changed when the system is renewed.

Lightweight, strong and without deflector

Beams

This beam is made from anodised aluminium and is both lightweight and strong. It is anchored to walls by combining two parts: an end and a shoe. The beam end fits inside the beam and rests on the shoe, which is narrower than the beam. This installation method prevents the deck from rubbing and jamming against the beam anchor. 

The beam also has clipping lugs for fitting the duckboards and a side groove to accommodate the counterweights.

Mechanical assembly

• BWT Subéo AX-IN beam available in anodised aluminium,

• Duckboarding: PVC 4 colours, 1 ready to weld, 1 ready to tile and 1 in Aluminium,

• Pit wall available in 4 colours,

• Counterweight,

• Anodised Aluminium axle, Ø 150 mm ou 180 mm,

• PVC slat cover aprons available in 5 colours, solid PVC slat aprons available in 2 colours, Polycarbonate slat aprons available in 2 colours,

• In-line motor with optional clutch system.

Product Advantages Quick View

• Specially designed for easy installation,

• Lightweight, ultra-strong beam,

• Installation without deflector,

• New grating with interchangeable finish, grating simply clips in place,

• Submerged enclosure with adjustable gap between 2 grating slats,

• Grating simply clips in place,

• Vertical compensation of the fixing system,

• Motor in dry pit, limit switch management box,

• Optional Bluetooth and optional installation tool

• Available in non-declutchable version and declutchable version that allows the pool to be secured in the event of a power outage or motor failure,

• Comes in sealed fitting and wall mounted fitting versions.

• Optimal protection against accidental falls into water.

• Complies with standard NF P90-308.

BWT, the perfect slat by design

The slat apron is the most important part of the automatic submerged cover, as it both secures the pool and is its visible part. This is why BWT has paid particular attention to the design of the slats that make it up. BWT slats are the best in every category: exceptional buoyancy, excellent insulation, extremely reliable. They were designed to satisfy the most demanding pool owners.

Discover our slat aprons.